Stellar Access Point 1301

Description

Radio Specifications
• AP type: Indoor
• Dual Radio, 5 GHz 802.11ax 2×2:2 and 2.4 GHz 802.11ax 2×2:2
¬ 5 GHz: 2×2:2 up to 1.2 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices
¬ 2.4 GHz: 2×2:2 up to 573 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices
• Supported frequency bands (country-specific restrictions apply):
¬ 2.400 to 2.4835 GHz
¬ 5.150 to 5.250 GHz
¬ 5.250 to 5.350 GHz
¬ 5.470 to 5.725 GHz
¬ 5.725 to 5.850 GHz
• Available channels: Dependent on configured regulatory domain
• Brazil: Maximum transmit power: 21 dBm on 2.4 GHz, 21 dBm on 5 GHz
• Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
¬ 21 dBm on 2.4 GHz (18 dBm per chain)
¬ 21 dBm on 5 GHz (18 dBm per chain)
• DFA (Dynamic Frequency Adjustment) optimizes available channels and provides proper transmission power
• Short guard interval for 20-MHz, 40-MHz, and 80-MHz channels
• Transmit beamforming (TxBF) for increased signal reliability and range
• 802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU)
• Supported data rates (Mbps):
¬ 802.11b: 1, 2, 5.5, 11
¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
¬ 802.11n (2.4 GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
¬ 802.11n (5 GHz): 6.5 to 600 (MCS0 to MCS31, HT20 to HT40)
¬ 2.4 GHz 256-QAM: 6.5 to 400 (MCS0 to MCS9, NSS=1 to 2, VHT20 to VHT40)
¬ 802.11ac: 6.5 to 866.7 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)
¬ 802.11ax (2.4GHz): 3.6 to 573 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
¬ 802.11ax (5GHz): 3.6 to 1201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
• Supported modulation types:
¬ 802.11b: BPSK, QPSK, CCK
¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
¬ 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support: VHT 20/40/80
• 802.11ax high efficiency (HE) support: HE 20/40/80
• Advanced Cellular Coexistence (ACC)
Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/femtocell equipment

Interfaces
• 2x 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE) 802.3af compliant
• 1x USB 2.0 Type C (5V, 500mA)
• Reset button: Factory reset

Visual Indicators (Tri-color LED)
• For system and radio status
¬ Red flashing: System abnormal, link down
¬ Red light: System startup
¬ Red and blue rotate flashing: System running, OS upgrading
¬ Blue light: System running, dual bands working
¬ Green flashing: System running, no SSID created
¬ Green light: System running, single band working
¬ Red, blue and green rotate flashing
¬ System running, use for location of an AP

Security
• 802.11i, WPA2, WPA3, Enterprise with CNSA Option, Personal (SAE)
• 802.1X
• WEP, Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP)
• Firewall: ACL, wIPS/wIDS and DPI application policy enforcement with OmniVista
• Portal page authentication

Antenna
• AP1301: 2×2:2 @ 2.4 GHz, 2×2:2 @ 5 GHz
¬ Integrated omni-directional antennas with maximum antenna gain of 3.3 dBi in 2.4 GHz and 3.3 dBi in 5 GHz

Receive sensitivity
2.4 GHz 5 GHz
1 Mbps -97
11 Mbps -90
6 Mbps -93 -93
54 Mbps -76 -77
HT20(MCS0/8) -93 -93
HT20(MCS7/15) -73 -76
HT40(MCS0/8) -91 -91
HT40(MCS7/15) -72 -74
VHT20(MCS0) -93 -93
VHT20(MCS8) -71 -73
VHT40(MCS0) -91 -91
VHT40(MCS9) -67 -88
VHT80(MCS0) -88
VHT80(MCS9) -64
HE20(MCS0) -93 -93
HE20(MCS11) -64 -65
HE40(MCS0) -90 -91
HE40(MCS11) -62 -62
HE80(MCS0) -88
HE80(MCS11 -59

Maximum Transmit power (per chain) 1 Mbps
2.4 GHz 5 GHz
1 Mbps 18dbm
11 Mbps 18dbm
6 Mbps 18dbm 18dbm
54 Mbps 16dbm 16dbm
HT20(MCS0/8) 18dbm 18dbm
HT20(MCS7/15) 15dbm 15dbm
HT40(MCS0/8) 18dbm 18dbm
HT40(MCS7/15) 15dbm 15dbm
VHT20(MCS0) 18dbm 18dbm
VHT20(MCS8) 14dbm 15dbm
VHT40(MCS0) 18dbm 18dbm
VHT40(MCS9) 14dbm 15dbm
VHT80(MCS0) 18dbm
VHT80(MCS9) 14dbm
HE20(MCS0) 18dbm 18dbm
HE20(MCS11) 14dbm 15dbm
HE40(MCS0) 18dbm 18dbm
HE40(MCS11) 14dbm 15dbm
HE80(MCS0) 18dbm
HE80(MCS11) 14dbm

Power
• Supports direct DC power and Power over Ethernet (PoE)
• When both power sources are available, DC power takes priority over PoE
• Direct DC source:
¬ 48 V DC nominal, +/- 5%
• Power over Ethernet (PoE):
¬ IEEE 802.3af source
• Maximum (worst case) power consumption:
¬ 13.1W (input IEEE 802.3af POE); Unrestricted functionality

Mounting Ceiling/wall mounting (Mount kit needs to be ordered separately

Environmental
• Operating:
¬ Temperature: 0°C to 45°C (-32°F to +113°F)
¬ Humidity: 5% to 95% non-condensing
• Storage and transportation: Temperature: -40°C to +70°C (-40°F to +158°F)

Dimensions/Weight
• Single AP excluding packing box and accessories:
¬ 180mm (W) x 180mm (D) x 36mm (H) – 7.08” (W) x 7.08” (D) x 1.41” (H)
¬ 574g/1.26lb
• Single AP including packing box and accessories:
¬ 228mm (W) x 198mm (D) x 66mm (H) – 8.97” (W) x 7.79” (D) x 2.59” (H)
¬ 780g/1.71lb

Reliability MTBF: 1,118,457h (127.67 years) at +25ºC operating temperature

Capacity
• Up to 8 SSID per radio (total 16 SSID)
• Support for up to 512 associated client devices

Software feature
• Up to 4K APs when managed by OmniVista 2500. No limit on number of AP groups
• Up to 255 APs per web managed (HTTP/ HTTPS) cluster
• Auto channel selection
• Auto transmit power control
• Bandwidth control per SSID
• L2 roaming
• L3 roaming with OmniVista 2500
• Captive portal (Internal/External)
• Guest self-registration optional SMS notification) with OmniVista 2500
• Internal user database
• RADIUS client
• Guest social-login with OmniVista 2500
• RADIUS proxy authentication with OmniVista 2500
• LDAP/AD proxy authentication with OmniVista 2500
• Wireless QoS
• Band steering
• Client smart load balance
• Client sticky avoidance
• User behavior tracking
• White/black list
• Zero-touch provisioning (ZTP)
• NTP Client
• ACL
• DHCP/DNS/NAT
• Wireless MESH P2P/P2MP
• Wireless Bridge
• Rogue AP location and containment
• Dedicated Scanning AP
• System log report
• SSHv2
• SNMPv2
• Wireless attack detection with OmniVista 2500
• Floor plan and heat map with OmniVista 2500
• Stanley Healthcare/Aeroscout RTLS support

IEEE standard
• IEEE 802.11a/b/g/n/ac/ax
• IEEE 802.11e WMM, U-APSD
• IEEE 802.11h, 802.11i, 802.11e QoS
• IEEE 802.1Q (VLAN Tagging)
• 802.11k Radio Resource Management
• 802.11v BSS Transition Management
• 802.11r Fast roaming

Regulatory and certification
• CB Scheme Safety, cTUVus
• Wi-Fi CERTIFIED, Wi-Fi 6, Passpoint R3
• FCC
• CE Marked
• EN 60601-1-1 and EN 60601-1-2
• RoHS, REACH, WEEE
• EMI and susceptibility (Class B)
• 2014/35/EU Low Voltage Directive
• 2014/30/EU EMC Directive
• 2011/65/EU RoHS Directive
• 2014/53/EU Radio Equipment Directive
• EN 55032
• IEC/EN 60950 and 62368
• EN 300 328
• EN 301 893
• EN 301 489-1
• EN 301 489-17